High Pressure Tubing
£1,000.00 Original price was: £1,000.00.£800.00Current price is: £800.00.
- Parker Autoclave’s high-pressure tubing is capable of operating to 150,000 psi (10342 bar)
- Standard tubing is available in 316 and 304 stainless steel tubing
- Coned-and-threaded connection
- Tubing sizes are 1/4″, 5/16″, 3/8″, 9/16″, and 1″.
- Operating temperatures from -423°F (-252°C ) to 1200°F (649°C).
- Stock tubing lengths from 20 to 26.5 foot (6 to 8 meters).
- Special material and special length tubing available.
Related products
-
Sale!
Condensate Pot
The primary use for the Parker range of condensate pots is to increase the accuracy of flow measurement in steam pipelines. They provide an interface between the vapour phase and the condensed phase in the impulse lines.
The condensate pots are available in a range of materials and have been designed in accordance with ASME VIII Div 1 and produced in an ASME coded workshop. All condensate pots are CE* marked to PED 2014/68/EU for use with Group 2 Gases. Installation can be either vertical or horizontal lines between the primary (Flow Meter) and the secondary (transmitter/ gauge) to act as a barrier to the line fluid permitting direct sensing of the flow conditions. Units should be mounted at the same level minimising possible error that could arise due to unequal head of fluid in the connecting pressure lines. Please see our Condensate Pot Installation Guide.
Typical industry applications include: Refineries, Power plants, Chemical and Petrochemical, Steel plants and other process industries.
£1,000.00Original price was: £1,000.00.£800.00Current price is: £800.00. -
Coning and Threading Tools
Parker Autoclave Engineers manufactures a manual coning and threading tool for optimum performance with tubing sizes up to 9/16” (14.3 mm) outside diameter. These precision quality manual tools permit on-site end preparation for Parker Autoclave Engineers medium and high pressure tubing installations.
Included with all kits:
Coning Tool Assembly:
• Three Collets
• Collet Nut Wrench
• Three sets of Coning Blades (1/4″ to 9/16″)
• 3/32″ Coning Blade Allen Wrench (p/n 90256)
• Four spare Set Screws (p/n 90254)
• De-burring Tool (p/n 90257)
• One quart of Cutting Oil (p/n P-8784)
• Tool Box with trayThreading Tool parts include:
• 1/8″ Die Allen Wrench (p/n P-0285)
• Die Set Screws (p/n P-0281)
• Threading Tool with Handle
• Three Guide Bushings (1/4″, 3/8″, 9/16″)
• Three Threading Dies (1/4″, 3/8″, 9/16″)
• Laminated Instruction SheetParker Autoclave Engineers both Medium and High Pressure coning and threading tool kits. Each kit consists of the required tools and other items necessary for your coning and threading needs. All kit items are placed in a hand-carry tool case with top tray.
Medium Pressure Kit (p/n KMCT-MT)
MCT Coning Tool and:
• 1/4, 3/8 and 9/16″ collets
• 1/4, 3/8 and 9/16″ blades
• (9/16” blades for 20,000 psi tubing only)402 Threading Die Holder Tool and:
• 1/4, 3/8 and 9/16″ guide bushing
• 1/4, 3/8 and 9/16″ diesOptions:
KMCT-MTR Kit includes Reservoir Assembly (see page 4)
KMCT-MTS Kit includes Support Arm AssemblyKMCT-MTRS Kit includes both Reservoir and Support
Arm AssembliesHigh Pressure Kit (p/n KMCT-HT)
MCT Coning Tool and:
• 1/4, 3/8 and 9/16″ collets
• 1/4, 3/8 and 9/16″ blades
• (9/16” blades for 60,000 psi tubing only)
402 Threading Die Holder Tool and:
• 1/4, 3/8 and 9/16″ guide bushing
• 1/4, 3/8 and 9/16″ diesOptions:
Manufacturers Information
KMCT-HTR Kit includes Reservoir Assembly (see page 5)
KMCT-HTS Kit includes Support Arm Assembly
(see page 5)
KMCT-HTRS Kit includes both Reservoir and Support
Arm Assemblies -
Sale!
Commercial Grade Tubing
Commercial Grade Tubing, various materials from European Sourced Mills, please contact us for sizes and availability
£1,000.00Original price was: £1,000.00.£800.00Current price is: £800.00.
Talk To Us Today
Speak to an expert within seconds about our extensive range of products and services.